Sanifount

Ask more info

1 2 3 4

The 2,3 and 4 person SANIFOUNT® allows for convenient user comfort and floor space savings. The fixture saves water and energy over conventional plumbing fixture. Each vandal resistant spray nozzle dispenses water at a rate of 0.5 GPM.

SANIFOUNT'S ® innovative integral bowl and trap cover is made of Anti-microbial SOLIDSANTM, a composite material of acrylic polyester resins and aluminium trihydrate fillers, which has the look of elegance, pleasant to the touch, but is equally durable and resistant to permanent staining. The unit complies with ANSI Z124.3 IAPMO IGC 156-2003 and is cUPC approved. It is resistant to stains and burns. SOLIDSAN cleans easily with Scotchbrite, household cleansers or fine grit sand paper. The sprayhead and locking cover is constructed of 304 stainless steel (Polished finish) and allows for easy access to all working components.

Integrated No-Touch Liquid Soap Dispenser (with Sensor Operated Units)Sanifount can be supplied with an integrated no-touch liquid soap dispenser. Before start of the water flow cycle, the user is provided with an amount of liquid soap without having to touch anything at all.
Thermostatic Mixing Valve
Air controlled Pushbutton Metering ValveSanifount can be supplied with an optional air controlled pushbutton metering valve that is field adjustable to allow from 5 to 60 seconds of water flow.
Pushbutton Liquid Soap DispenserSanifount can be supplied with an integrated pushbutton liquid soap dispenser.
Piezo Electronic Touch ButtonA very light touch on the button will open the solenoid. Water will flow for 10 seconds but can be shut off earlier.
Maximum Hygiene Through No-Touch Electronic ControlSanifount is engineered to be completely hygienic, the no-touch control eliminates every contact with soiled and contaminated surfaces. The smooth anti-microbial synthetic compound material, Solidsan™, assures a rapid and easy drain of the water, thus m
Economy of SpaceBecause of its special concept and its compact design Sanifount replaces 2, 3 or 4 conventional lavatories. Sanifount is the ideal space-saving solution to washrooms with intensive use.
Autonomy Through Battery-Operation (9 V Lithium Batteries)9V lithium batteries assure an entireley autonomous operation, electrical connectioons are not necessary. The battery-pack has a longevity of approximately 144,000 to 240,000 uses.
Easy InstallationThe unit is entirely pre-assembled with integrated components, which allows for quick and easy connections to the water supplies. Damage to new or existing washroom interiors for additional electrical wiring and recesses for transformers is excluded by th
Easy MaintenanceThe unit is designed in such a way that all key components (microprocessors, batteries, valves and sensors) can be reached from the top of the unit.
User FriendlySanifount is designed and manufactured to meet the most stringent U.S. and international standards. The no-touch control and its design is extremely user friendly. Physically challenged and disabled users can easily approach and make use of the Sanifount.
Water and Energy ConservationWater only flows during effective usage. The temperature of the water can be controlled through the use of the optional thermostatic mixing valve.
Vandal ResistantThe water distribution head made from stainless steel and its sturdy cover guarantee durability and protection against possible vandals. The passive detection system avoids continuous water flow when an object is placed in the bowl. In between two washing
Barrier-Free / ADA CompliantMeets ADA (Americans with Disabilities Act), CAL (California Building Code), TAS (Texas Accessibility Standards) requirements.

Ash White

detail

Desert Sand

detail

Midnigh Blue

detail

Misty Grey

detail

Pearl Black

detail

Adobe Brown

detail

Twilight grey

detail

The water flow cycle is controlled by a microprocessor, which monitors the opening and closing of the solenoid valve, based on the information received from the sensors detecting human warmth.

 

The Sanifount contributes to meeting LEED requirements in the following categories:

  • WEp1 - Water Efficiency
  • WEc3 - Water Use Reduction

Each nozzle has a flow rate of 0.5 gpm.

Electronic units: The water will flow as long as the hands are under the sensor with a maximum of 30 seconds.

Pushbutton units: The water will flow for 10 seconds which means that 0.083 gallons of water is used per cycle.

Piezo units: The water will flow for 10 seconds which means that 0.083 gallons of water is used per cycle.

The electronic soap dispenser option works on the existing water pressure and doesn't require any outside power.

The water distribution head is made of stainless steel. Stainless Steel is 100 % recyclable.