Intersan | Contractors

Most Components Are Above
Deck For Easy Access.

Low Maintenance Cost:

• Trouble Free Quality Components

• Easy Access to All Controls and Vital Parts

• Screwdriver Type Ball Valves Included

Product delivered in no more than two boxes.

Unscrew one locknut
to remove the upper part
of the column.

Fix the footrail and
position the bowl.

Tighten the whole
assembly with one single
locknut.

It's Flexible to Rough-in

Rough-in's don't need to be all that precise! Anywhere in the shaded areas is fine with us.

It's Flexible to Hook-up

No extra drain pipe.
No extra drain fittings.
No extra no-hub couplings.
No extra cutting or soldering required.
Just connect flexibles.

Flexible Supplies: Quality stainless steel braided 1/2" flexible supplies are standard
with an extra solder adapter (CXF), for easy connection to the mains.

Unique 4-way Cast-iron Trap With or Without Vent

Can be used as a:

A P-trap with vent, connected to the floor.
B P-trap with vent, connected horizontally to the wall.
C Straight drain connected to the drain/trap in the floor.
D Straight drain connected horizontally to the drain/trap in the wall.

• Intersan is easy to retrofit. All systems are pre-plumbed and pre-assembled. All fixtures install in 30 minutes to 1 1/2 hours; some in less than 30 minutes.

• Single trade installation

• Intersan systems use your existing plumbing. Because there are no electrical outlets or special plumbing modifications required, there are fewer connections to make.

• Intersan is reliable: Valves and their components are made of durable brass and stainless steel, not plastic.

• Retrofit with Intersan and eliminate costly repairs on your current fixtures.

• Our technologically advanced fixtures are engineered with fewer components and require little maintenance.

Retrofitting old washfountain installations:

The stainless steel washfountain choice is based on the fact that public washroom fixtures furnished in vitreous china and molded stone have proved over time to be unsatisfactory, since they are easily vandalized and don't age well.

As all plumbing parts are included preassembled in the Sanispray® pedestal equating to valuable time-savings.

Circular Washfountain

Stubs remain once
the old fixture is removed.

Modify existing stubs
to accept 1/2" flex hoses
and flex drain.

Semi-Circular and Corner Washfountains

Area in which you can
connect our flex
supplies and drain.

So, just break the
old unit out and set
the Sanispray®.

(return to top)
Product delivered in no more than two boxes.
	1 Unscrew one locknut to remove the upper part of the column.	2 Fix the footrail and position the bowl.	3 Tighten the whole assembly with one single locknut.
	Fast Installation Cuts Labor Costs. • All-inclusive and preplumbed packed in two cartons. Results in a 1 - 2 - 3 assembly: easy - fast! • All systems are pre-plumbed and pre-assembled. • Single trade installation for battery operated passive infrared systems. No electrical connections required. • All products can be installed in 30 minutes to 1 1/2 hours; some in less than 30 minutes. Fast Delivery! Most Systems shipped in 3-5 Days or Less.
It's Flexible to Rough-in Rough-in's don't need to be all that precise! Anywhere in the shaded areas is fine with us. It's Flexible to Hook-up No extra drain pipe. No extra drain fittings. No extra no-hub couplings. No extra cutting or soldering required. Just connect flexibles. Flexible Supplies: Quality stainless steel braided 1/2" flexible supplies are standard with an extra solder adapter (CXF), for easy connection to the mains.

	Unique 4-way Cast-iron Trap With or Without Vent
		Can be used as a: A P-trap with vent, connected to the floor. B P-trap with vent, connected horizontally to the wall. C Straight drain connected to the drain/trap in the floor. D Straight drain connected horizontally to the drain/trap in the wall.